Embroidery World

Dos and Don’ts of Embroidery Digitizing:

Digitizing is a crucial for any embroidery digitizing company that can make or break the quality of your design. Whether you’ve just unboxed your embroidery equipment or have been embroidering for years, knowing what digitizing is and how it works is critical to your success. Even if you outsource your embroidery digitizing services, knowing a little about how it works will help you choose the best embroidery digitizer for your needs and ensure that it is beneficial to your business. If you don’t take the effort to learn about digitalization, you risk making costly mistakes that waste your money and time.


Let’s get this party started!





  • Make use of a layer of underlayment:


The underlay is the foundation of your embroidery digitizing and works to aid it. If you use the wrong underlay, the stitches may sink into the cloth. A centering underlay is required when stitching small textual material, for example, to prevent the underlay from peeking through the top stitches. A negative underlay can also cause the material to reveal through the pattern. The design will no longer be stabilized if you choose the improper underlay, resulting in a messy pattern and a more difficult stitching operation. 



  • While you’re digitizing, consider the garment:


Recall what you need to embroider on a layout before going for embroidery digitizing. A pattern designed for stretchy knitted fabric, on the other hand, will not look well on denim because it was designed with the stretchiness of the knitted fabric in mind. A curved design embroidered on a flat material will no longer produce the best results.

Because it ignores the curved surface of the cap, a design intended for studios can no longer be painted on a cap. On a stretchy fabric, for example, too much density might cause puckering, which does not happen with various subs.



  • Consider the stitching attitude:


The best embroidery digitizing services take care of angle at which the machine embroiders the stitches is referred to as the sew angle. Using the most effective one sews angle, on the other hand, can result in flat, one-dimensional drawings that don’t glide. Any angle can be employed, from horizontal to vertical to diagonal.

Using different angles results in a more appealing and textured design with more contrast between the various elements. If you want the design to look good, you’ll need different stitch angles for different quantities of the pattern.



  • Digitize in a logical order:


The order in which the machine embroiders the design is crucial. The pattern will not be adequately stabilized if the machine embroiders out of sequence, resulting in a distorted and badly stitched layout with several issues. The device must stitch from the center outward in order to avoid puckering while embroidering on headwear.


For example, little design skills should be stitched last. When doing embroidery digitizing, you want to make sure that everything is stitched in the correct order. When embroidering a design, the device should start with a placement sew, then the underlay, and finally the pinnacle sews. 






  • Don’t digitize without a strategy in mind:


Any endeavor, including digitization, necessitates improved planning for a successful embroidery digitizing company. If you conduct a planning session for the layout you need to digitize, you may avoid mistakes and ensure a higher design standard. Consider the material you’ll be embroidering on, the design you want to make, and the colors you’ll need to use.


Too many sore stitches should be avoided:

Jump stitches can also cause puckering, giving your embroidered designs a low-high-quality appearance. Jump stitches can occur as a result of a badly digitized sample in which the needle jumps from one location to the next at random. The needle drags the thread at the back of the design as it moves from one phase to the next.


Don’t rely on computerized digitizing software exclusively:

Auto embroidery digitizing services are readily available if you are just getting started with embroidery. If you want to increase your efficiency and productivity, you should digitize yourself or have someone else do it for you. Basic errors will be avoided if you are doing embroidery digitizing yourself or have someone else do it for you, which will improve your performance and production.


Don’t make a blunder when it comes to density:

Due to its stiffness, high density may also result in a layout that is difficult to wear. Density is important since it has a significant impact on the embroidery layout. If your density is too high, you risk a distorted layout, damaged needles, thread breakage, and fabric tears. Sewing time is reduced, and there may be less density, which reduces the chance of thread breaks and needle damage.


Final Verdict: 

Without embroidery digitizing, you wouldn’t be able to embroider; without it, you wouldn’t have any designs to embroider. If you’re outsourcing your embroidery digitizing company, these pointers can help you inspect your digitizer’s layout and ensure you choose the right person for the job. That is why it is critical to understand the dos and don’ts of digitization.