Embroidery World

Things to Keep in Mind When Digitizing Embroidery Patches

Manufacturing and digitizing for embroidery patches can be intimidating if you’re new to the embroidery world. Embroidering patches isn’t particularly difficult or time-consuming when compared to other embroidery orders. Nonetheless, sooner or later, you must get started, and if that is the case, why not as soon as possible?

Once you’ve gotten started, embroidered patches are one of the most popular orders made with embroidery digitizing services. Patches will continue to be a favorite among dedicated embroiderers and buyers due to their precise crispness and assertiveness. We’ll be embroidering and digitizing patches, which are both well-known techniques. We can keep this text simple and concise without delving in troublesome enterprise jargon because it is intended for novices.

Ordering And Selecting Raw Materials: 

Prior to creating or digitizing an embroidery patch, you must first order plain patches on which the layout will be applied. There could be a wide range of sizes to choose from. Locating patch sizes, ranging from 1 inch to a full-back, is a no-brainer.

The shade is the first thing to consider after the size and form. You can either stick to the fabric’s color and be safe, or you can get creative and experiment with new shades. The back of the patch can be plain or warm-touchy. Finally, you must choose a merrow color. Merrow is the thread that runs across the patch’s border. 

Embroidery Patch Digitization:

Scanning your patch and converting it to a graphical format is the first step. Open it in an embroidery digitizing software application once it’s finished. It will serve as a foundation for the design to be built upon. Make sure the design is focused on the patch and that the patch is also in the middle of the outline. It will place everything in the same place as your layout generally begins and ends in the center.

Always work far away from the border while digitizing for embroidered patches. It’s critical because otherwise, the system’s presser foot will press against it.  After you’ve finished digitizing the embroidered design, it’s time to put it to use. Before you put it on, go outside and do a running stitch. This outline can also start and stop in the middle. The purpose of this outline is to make it clear where the patch should go. To make things easier, you can overlap your definition with the layout.

Sew the jogging stitch definition first during embroidering. Add a stop characteristic here while digitizing. When the outline is embroidered, the system will come to a halt. Before the design is supplied to it, use the outline to center your clean patch.

Gluing the Embroidery Patches to the Garment: 

A sticky backing or stabilizer can undoubtedly be used for gluing embroidery patches. Stabilizers are an essential if you are actually knowledgeable about embroidery production. A twig adhesive is the second choice. If you’re going to use a spray adhesive for gadget embroidery, make sure it’s a synthetic one and it dries after using. Now, place it on the garment to see if it sticks. 

It’s important to use caution here to avoid spray adhesive getting into the system’s components. It has the potential to cause serious problems with the system’s normal operation. As you can see, digitizing embroidery patches and embroidering them is not difficult. 

Reach out to us for experienced digitizing for embroidery designs at the most affordable prices. We are a professional custom digitization service that can deliver high-quality digitized designs in a matter of hours. You’re aware of what’s even higher? It is recommended to charge $1 for every thousand stitches. Request a quote right now!

CLICK HERE TO REGISTER WITH US

Digitizing-Promotion-Offer